اینورتر G120 زیمنس

:6SL3244-0BA10-0BA0

Description:

Siemens Sinamics G120 Control Unit model CU240E. A key component of the modular Sinamics G120 range, the Control Unit must be fitted to a compatible Power Module to form a complete Inverter Drive.

The CU240E was cancelled in Oct 2011 and is therefore no longer available. Siemens recommend the CU240E-2 as a possible replacement (see linked products below). Refer to the replacement guide below for further information.

Size: 73mm Wide × 195mm High × 30mm Deep
Weight: 0.21kg

Operation: VxF, Sensorless Flux Vector.

Analogue Inputs: 2
Analogue Outputs: 2
Digital Inputs: 6
Digital/Relay Outputs: 1
Relay Outputs: 2

Motor Temperature Terminals
Fieldbus: RS486 for USS, Modbus RTU

Part number is 6SL3244-0BA10-0BA0. Model number is CU240E.

Download the CU240 Control Unit Manual and replacment guides from the links below:

• Siemens CU240 Series Control Unit Manual (9.3 MB)
• Siemens CU240E Replacement Guide (251 kB)

------------------------------------------------------------------------------------------------------------------------------------
:6SL3224-0BE13-7UA0

Description:

Siemens Sinamics PM240 Power Module for 0.37kW (0.5HP) 400V Three Phase Motor to 1.3A at High Overload or when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.

Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.

Size A - 73mm Wide x 145mm Deep x 173mm High (excluding Control Unit). IP20
Weight: 1.2kg

Overload: 150% x 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. High Overload.
Overload: 110% x 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. Fan/Pump Rated.
Braking: to 390 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.

Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 1.6A at High Overload, 1.7A when Fan/Pump rated.
(EMC Filters: None (external option)

Wall mount in clean environment or cubicle mount
Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated
Ventilation space in front: 65mm
Ventilation space above: 100mm
Ventilation space below: 100mm
Ventilation space at sides: 30mm
Heat Loss at max output: 97W
Mounting via 2 x 4.5mm diameter holes at rear on 160mm centres

Manufacturer part number is 6SL3224-0BE13-7UA0

Download the Siemens Sinamics G120 Power Module PM240 Installation Manual from the link below:

• (Siemens Sinamics G120 PM240 Power Module Manual (11.3 MB)
• --------------------------------------------------------------------------------------------------------------------------------
• 6SL3224-0BE22-2AA0
• Description:

  Siemens Sinamics PM240 Power Module for 2.2kW (3HP) 400V Three Phase Motor to 5.9A at High Overload or when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.

  Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.

  Size B - 153mm Wide x 165mm Deep x 270mm High (excluding Control Unit). IP20
  Weight: 4.3kg

  Overload: 150% x 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. High Overload.
  Overload: 110% x 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. Fan/Pump Rated.
  Braking: to 160 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.

  Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
  Input Current: 7.6A at High Overload, 7.6A when Fan/Pump rated.
  EMC Filters: Internal, to EN 55011 Class A (Industrial)

  Wall mount in clean environment or cubicle mount.
  Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
  Ventilation space in front: 65mm
  Ventilation space above: 100mm
  Ventilation space below: 100mm
  Ventilation space at sides: 30mm
  Heat Loss at max output: 139W
  Mounting via 4 x 4.8mm diameter holes at rear on 133mm x 258mm centres.

  Manufacturer part number is 6SL3224-0BE22-2AA0.

  Download the Siemens Sinamics G120 Power Module PM240 Installation Manual from the link below:

  Siemens Sinamics G120 PM240 Power Module Manual (11.3 MB)